Xtramus NuTAP-R series are 1000M/100M/10M Network TAP Analyzers which have port aggregation function at present Network monitor market. NuTAP-R series, the high level segment and rackmount form factor of NuTAP-R series, is the first network surveillance equipment that supports Gigabit Ethernet after NuTAP series. Its surveillance network port which has 2 or 4 Combo interfaces can support wirespeed forwarding of Gigabit Ethernet at the same time, Packet Capture, and Packet Re-direction functions.

NuTAP-R series is embedded with 1 Gigabits high-speed memory and trigger module which can monitor 30 sets of network counters per line. Those can let users set the network packets which need to be redirect by their own. Besides, the up to 60 sets of event counters on each surveillance line can provide as important data for network statistics, error detecting, analysis, monitoring and so on.
NuTAP-R series supports the operating mode of 10/100/1000Mbps (UTP) and 1000Mbps (SFP). The relay function links TAP ports directly to insure there is not network interruption when power failure happens. And plus the Redundant backup power system, we can assure you the best network connection. It will be a trustworthy network tap for UTP network.

● Active TAP based on monitor-and-forward architecture.

● Real-time monitoring and analyzing of network traffic.

● Relay function to insure no interruption when power failure happens.

● Provide an invisible, non-intrusive permanent access to network monitoring and analysis devices without link disruption or degradation.

● Simultaneous non-blocking forwarding of all TX and RX traffic, including error packets.

● Protect the IDS sensor from attack by the monitored segment.

● Option to withdraw Redirecting /mirroring function to avoid any problems associated with such methods.

● All filter settings can be defined by management port.

● Easy to read counter status.

● Filter support s 8-set 32bits UDF and 2-set 48bits UDF (offset fix at DA/SA).

● Support full set RMON counter.

● Real-time LED indicator of traffic events and monitoring.

● Redirect packet in Aggregation or Segregation mode.

● Design of web-based management interface makes the active friendly.

● Provide the Statistic Counter (30 sets of individual counter per port).

● Built-in filter to block traffic from specific network port(s) to the monitoring port (Individual 10 sets filter per port, R series and A series).

● Optional Redundant power (DC 48V power input module).

● Support PoE Link automatically.