In order to guarantee the quality of the network devices, it is necessary to implement thorough tests on the products. However, in the real-world environment, the connection cables between the devices are random, from several meters to hundreds of meters. Hence, strict tests must consider both of the long-cable case and the short-cable case. Cables in hundreds of meters always take up a lot spaces. And long cables always bring problems to the operators in its management and use. In addition, long time testing will deteriorate the quality of the network cables and cause "False Fail" on the test results. This will greatly reduce the test precision and lower the production capability. Therefore, Xtramus provides a perfect solution for 100-meter replacement-LES-5160 cable emulator. The small LES-5160 chassis can emulate up to 100-meter network cables. LES-5160 will help you to optimize your test environment by removing bundles of 100-meter cables and make the operator free from the bother of network cable management.
A LES-5160 chassis has 16 slots for inserting 16 cable emulation modules. Installing a LES-5160 chassis equals to place 16 bundles of network cables between the tester and DUT. 16-slot design makes it possible for testing multi-port Ethernet devices.
LES-5160 for replacing real network cables
And working with APMPT-4，an integrated Ethernet analyzer software by Xtramus, the emulated cable length can be specified, saving plenty of time for the operator changing cables of different lengths. There are three length modes for options, 0M, 1M and 100M.
Set the cable length on software "APMPT-4"
