 |
Knight x2D is a handheld device with 2 combo 10G ports and 2 TAP ports for Ethernet testing. Knight x2D optionally functions as the multi-stream generator, network tap or both. |
Knight x2D is a handheld device with 2 combo 10G ports and 2 TAP ports for Ethernet testing. Knight x2D optionally functions as the multi-stream generator, network tap or both.
Knight x2D can workalong with a series of utility software that qualify industrial standards suchas RFC 2889, RFC 2544, and QoS. With these utilities, Knight x2D is able toconduct throughput test, latency test, error filtering test, forwarding test, networktap and so on. Utility software can provide a user-friendly interface fordifferent test configurations when setting different test parameters andcriteria. More optional software are available for extended test requirements.
With its unique Universal Stream Counter (USC), Knight x2D offers real-time statistics of network traffic testing and tapping.
Connecting Knight x2D to its RJ45 management port makes it possible for system configurations and managements. Knight x2D is an ideal device for in-field testing.
Knight x2D has new mechanism design, it’s more convenient to replace the cooling fan, so Knight x2D became easier to maintain.
With these advantageous features, Knight x2D is your best partner for LAB researching and in-field troubleshooting.
· Hardware based wire speed multi-stream generation, analysis, network TAP
· Supports multi-speed, 10G/5G/2.5G/1G/100Mbps(Full Duplex only)
· High precision performance for measuring throughput, latency, packet loss, disordered sequence
· Wire speed traffic capturing with programmable filter andtrigger criteria with network tapping function
· Supports data statistics per stream
· Utility software that complied with RFC-2544, RFC-2889 and RFC-3918
· High precision 1 ppm temperature-compensate oscillator provides accurate clock speed to ensure the reliability of the tests
· Adding errorsin transmitted traffic to simulate and test abnormal situations
· Real-timestatistics for each port, including transmitted/received frame for VLAN, IPv4,IPv4 fragment, IPv4 extension , ICMP, ARP, total bytes/packets, CRC, IPCS errorand over-and-under size frames
· Utility software with user-friendly interface that supports various parameter configurations and meets various test requirements
· Dedicate fan module design makes it easy for replacement
· Optionally GPS modules for purchasing
Knight x2D | |||
Supported Frame Format | · Ethernet Type II frame | · IEEE 802.3 frame | |
Application Mode | |||
Application Mode | PG Mode | PG Mode allows Knight x2D’s PortA/B and Monitor Ports M0/M1 to generate wirespeed streams | |
TAP Mode | Knight x2D monitors any data that flows through it and also provides abundant packet counters | ||
Upgrade Mode | Knight x2D performs system upgrade. | ||
Interface Ports | |||
Interface Ports | Network Port A/B | 10G/5G/2.5G/1G/100Mbps Full Duplex RJ45 10G/5G/2.5G/1Gbps SFP/SFP+ Combo Port · PG Mode: Stream generation Tx port · TAP Mode: TAP port | |
Monitor Port M0/M1 | 10G/5G/2.5G/1G/100Mbps Full Duplex RJ45 Port · PG Mode: Stream generation Tx port · TAP Mode: Monitor port | ||
Management Port | · Upgrade Mode: System upgrade | ||
Functional Specification and Hardware Counter | |||
Functional Specification | · Active TAP without interfering monitored traffic · DA/SA Variation, VLAN ID in Increase, Decrease, or Random for testing DUT addressing capability · Rapid-Matrix Mode: multi-stream generation · Frame Length: Fixed from 64 ~16k bytes or random · Payload in Frame: Specific payload or random pattern · Error Generation: CRC, Alignment, Dribble bits, Undersize frame, Oversize frame · Capturing Network events with SDFR (Self-Discover Filtering Rules) · 2nd level CRC check and transmission sequence check · Support Jumbo Frame (up to 16K bytes) | ||
Hardware Counter | · Rate: Tx Packet, Tx Byte, Tx Rate, Rx Packet, Rx Byte, Rx Rate · Collision counter: Tx Collision, Tx Single Collision, Tx Multi Collision, Tx Excess Collision · Error counter: Dribble Error, Alignment Error, CRC Error, DI Error, IPCS Error, Error & Loss Packet · Packet Size Counter: Under Size, 64, 65-27, 128-255, 256-511, 512-1023, 1024-522, Over Size · Layer 2 & Layer 3 Packet Counter: Broadcast, Multicast, Unicast, VLAN, IPv4, IPv4 Fragment, IPv4 Extension, ICMP, ARP, and Pause · Trigger Counter by SDFR | ||
GPS Module | This module is optional in purchasing | ||
Utility Software | |||
Utility Software | Knight-RFC: Test Suites for RFC2544, RFC2889 and RFC3918 Knight-Dashboard: Control suite for multiple streams generator Knight-TAP: Ethernet TAP suite base on TAP mode with real streams counter and streams chart | ||
Main Frame Spec | |||
Dimension | 186mm x 186mm x 31mm | ||
Net Weight | Approx. 750g | ||
Temperature | · Operating:0°C~ 40°C (32°F~ 104°F) | · Storage: 0°C~ 50°C (32°F~ 122°F) | |
Humidity | · Operating: 0% ~ 85% RH | · Storage: 0% ~ 85% RH | |
Power Source | External Power Adapter | ||
· Input: AC 100 V ~ 240 V, 50 Hz ~ 60 Hz | · Output: DC 12V | ||
| Product Brief | Knight x2D_PBF_Ver1.2_CHS | v1.2 |  |
| Knight x2D_PBF_Ver1.2_ENG | v1.2 | |
