MCS-2160 media converter chassis is a complete and versatile solution for the applications such as FTTx, CWDM, and carrier Ethernet. By the diversified speeds of 1,000Mbps and 10G, Xtramus provides different XC series module cards for different applications and can be applied according to your ideal network topology.
Combined with XC series modules, MCS-2160 media converter chassis provide various interfaces such as UTP, SFP, SFP+, XFP and CX4. All these interfaces are developed to support the protocols such as 100Base-Tx, 100Base-Fx, 1000Base-T, 1000Base-X, 10GBase-T, 10GBase-LR, 10GBase-SR and 10GBase-CX4, thus making your network more complete and solid.
Also, XC series module cards support MIB Counter Report including counters such as Packet, Byte, Broadcast packet, Pause Frame, Length: 64 Bytes, Length: 65~127 Bytes, Length: 128~255 Bytes, Length: 256~511 Bytes, Length: 512~1023 Bytes, Length: 1024~1518 Bytes, Unicast packet, Multicast packet, CRC Error, IP Checksum Error, Under size packet, and Over size packet.
All XC series module cards are equipped with real-time LEDs which display the status of each port, thus allowing users to view network status easily.
MCS-2160 media converter chassis provides an easy-to-access Management Webpage, allowing users to view system status, counters, upgrading firmware/FPGA and network statistics. Moreover, XC-CASC module card allows you to cascade multiple MCS-2160 chassis for managing these chassis at the same time.
With various interfaces, MCS-2160 provides different conversions between fibers and copper wires in 10G Ethernet.

MANAGEMENT WEBPAGE

MCS-2160 is embedded with a Management Webpage, and can be accessed by connecting XC-M667's RJ45 Port to the network which your PC is connected to, as shown in the figure down below.

MCS-2160's Management Webpage allows users to configure test parameters, access counters, make system settings and upgrade system firmware/FPGA. 

● Diversified interfaces including SFP, SFP+, UTP, XFP and CX4

● Support 3R (Re-generation, Re-timing, Re-shaping) Performance

● Support Jumbo Frame

● Support D/D (Digital Detection) functioned optical transceivers and overload protection

● Support easy-to-use Management Webpage that allows users to view system status, counters, upgrading firmware/FPGA and network statistics

● Multiple MCS-2160 chassis can be cascaded for system management

● Replaceable power modules for AC & DC power

● Support Link Loss Forwarding

● Optional Fan Tray (MCS-FANT-5) which can be placed under MCS-2160 chassis for ventilation