NuStreams-2000i is an ideal test beds for lab design, troubleshooting and mass production test of network products, supporting 10G/1000M/100M/10M Ethernet. NuStreams-2000i provides various interfaces for different test requirements. |
NuStreams-2000i is an ideal test beds for lab design, troubleshooting and mass production test of network products, supporting 10G/1000M/100M/10M Ethernet. NuStreams-2000i provides various interfaces for different test requirements.
Up to 16 swappable test modules meet the complex test requirement and provide a flexible solution for mass production test in line. Comprehensive temperature and fan speed monitoring offer an intelligent environment control and ensure a realizable test.
The global command feature synchronizes traffic generation between test modules and could conduct cross-module latency test. Production test become more efficient and economic by reducing test duration significantly.
Software like NuWIN-RM, APMPT-4, and a series of software which complies with RFC-2544, RFC-2889 enable the conformance test, performance analysis and stress possible.
● Comprehensive temperature & Fan speed monitoring with visual indicators
● Support hot swap of all test modules
● Synchronization auto calibration between test modules
● Support multi-user per test module for greater efficiency of hardware resource
● Multi-user application support
● Work with the XTRAMUS software applications for comprehensive functional testing, conformance testing and performance analysis all in one system
● Support 10/100/1000 Mbps (half / full duplex in 10/100 mode) Ethernet connections to a host PC, and can be set for auto-negotiation or speed is completely configurable
● Simple and Easy to read LED provides system status
● Replaceable fan tray
● Reduce test duration time, easily test RFC2544/2889 compliance, and create regression tests without programming
● Work with XM-RM Series Rapid Matrix Module for test of network DUT
● Wirespeed generation and receipt of layer 2 and 3 traffic
● Global Command on the chassis that can save lots of time to test the DUT
● High port density that test modules can be installed to 16 module slots
● Test chassis for Ethernet equipment with UTP cable, optical fiber or POF (plastic optical fiber) connections
● Rapid-Matrix module card that is installed on this chassis can generates multi-streams traffic simultaneously per port for the test that is similar to real network
Software Support | ● NuWIN-RM ● APMPT-4 ● NuApps-2544-RM ● NuApps-2889-RM ● NuCommander |
Interface | ● Power: Male IEC 320 receptacle ● Keyboard / Mouse: PS/2 6-pin DIN ● Monitor: HD-DB15 VGA port ● Ethernet: RJ-45 Gigabit port x 2 ● Serial: RS-232 port x 2 ● USB 2.0 port x 2 |
Slot | 16 for test modules |
Dimension | 29.5cm X 48.5cm X 19.6cm |
Temperature | ● Operating: -10oC~ 50oC (14oF~ 122oF) |
Humidity | ● Operating: 0% ~ 85% RH |
Net Weight | Approx. 12.1kg |
Power Source | AC 90V ~ 240V, 50Hz ~ 60Hz |
Power Consumption | 400 Watt |
Miscellaneous | ● LEDs shows the healthy status of running fan ● LED for each module shows the running status of installed module ● Independent power switch for the NuStreams-2000i chassis and the IPC module ● Digits LED display shows the current chassis ID ● Built-in sensor for detection of temperature and rotation speed of fans |